FreeBSD Security Advisory FreeBSD-SA-15:25.ntp [REVISED]
4 November, 2015 by security-advisories@freebsd.org | freebsd
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
=============================================================================
FreeBSD-SA-15:25.ntp Security Advisory
The FreeBSD Project
Topic: Multiple vulnerabilities of ntp [REVISED]
Category: contrib
Module: ntp
Announced: 2015-10-26, revised on 2015-11-04
Credits: Network Time Foundation
Affects: All supported versions of FreeBSD.
Corrected: 2015-10-26 11:35:40 UTC (stable/10, 10.2-STABLE)
2015-11-04 11:27:13 UTC (releng/10.2, 10.2-RELEASE-p7)
2015-11-04 11:27:21 UTC (releng/10.1, 10.1-RELEASE-p24)
2015-11-02 10:39:26 UTC (stable/9, 9.3-STABLE)
2015-11-04 11:27:30 UTC (releng/9.3, 9.3-RELEASE-p30)
CVE Name: CVE-2015-7701, CVE-2015-7702, CVE-2015-7703, CVE-2015-7704,
CVE-2015-7848, CVE-2015-7849, CVE-2015-7850, CVE-2015-7851,
CVE-2015-7852, CVE-2015-7853, CVE-2015-7854, CVE-2015-7855,
CVE-2015-7871
For general information regarding FreeBSD Security Advisories,
including descriptions of the fields above, security branches, and the
following sections, please visit https://security.FreeBSD.org/.
0. Revision history.
v1.0 2015-10-26 Initial release.
v1.1 2015-11-04 Revised patches to address regression in ntpq(8), ntpdc(8)
utilities and lack of RAWDCF reference clock support in ntpd(8).
I. Background
The ntpd(8) daemon is an implementation of the Network Time Protocol (NTP)
used to synchronize the time of a computer system to a reference time
source.
II. Problem Description
Crypto-NAK packets can be used to cause ntpd(8) to accept time from an
unauthenticated ephemeral symmetric peer by bypassing the authentication
required to mobilize peer associations. [CVE-2015-7871]
FreeBSD 9.3 and 10.1 are not affected.
If ntpd(8) is fed a crafted mode 6 or mode 7 packet containing an unusually
long data value where a network address is expected, the decodenetnum()
function will abort with an assertion failure instead of simply returning
a failure condition. [CVE-2015-7855]
If ntpd(8) is configured to allow remote configuration, and if the (possibly
spoofed) source IP address is allowed to send remote configuration requests,
and if the attacker knows the remote configuration password or if ntpd(8)
was configured to disable authentication, then an attacker can send a set
of packets to ntpd(8) that may cause it to crash, with the hypothetical
possibility of a small code injection. [CVE-2015-7854]
A negative value for the datalen parameter will overflow a data buffer.
The NTF ntpd(8) driver implementation always sets this value to 0 and are
therefore not vulnerable to this weakness. If the system runs a custom
refclock driver in ntpd(8) and that driver supplies a negative value for
datalen (no custom driver of even minimal competence would do this), then
ntpd(8) would overflow the data buffer. It is even hypothetically possible
in this case that instead of simply crashing ntpd(8), the attacker could
effect a code injection attack. [CVE-2015-7853]
If an attacker can figure out the precise moment that ntpq(8) is listening
for data and the port number on which it is listening, or if the attacker
can provide a malicious instance ntpd(8) that victims will connect to, then
an attacker can send a set of crafted mode 6 response packets that, if
received by ntpq(8), can cause ntpq(8) to crash. [CVE-2015-7852]
If ntpd(8) is configured to allow remote configuration, and if the (possibly
spoofed) IP address is allowed to send remote configuration requests, and if
the attacker knows the remote configuration password or if ntpd(8) was
configured to disable authentication, then an attacker can send a set of
packets to ntpd that may cause ntpd(8) to overwrite files. [CVE-2015-7851]
The default configuration of ntpd(8) within FreeBSD does not allow remote
configuration.
If ntpd(8) is configured to allow remote configuration, and if the (possibly
spoofed) source IP address is allowed to send remote configuration
requests, and if the attacker knows the remote configuration password or if
ntpd(8) was configured to disable authentication, then an attacker can send
a set of packets to ntpd that will cause it to crash and/or create
a potentially huge log file. Specifically, the attacker could enable
extended logging, point the key file at the log file, and cause what amounts
to an infinite loop. [CVE-2015-7850]
The default configuration of ntpd(8) within FreeBSD does not allow remote
configuration.
If ntpd(8) is configured to allow remote configuration, and if the (possibly
spoofed) source IP address is allowed to send remote configuration requests,
and if the attacker knows the remote configuration password or if ntpd(8) was
configured to disable authentication, then an attacker can send a set of
packets to ntpd(8) that may cause a crash or theoretically perform a code
injection attack. [CVE-2015-7849]
The default configuration of ntpd(8) within FreeBSD does not allow remote
configuration.
If ntpd(8) is configured to enable mode 7 packets, and if the use of mode 7
packets is not properly protected through the use of the available mode 7
authentication and restriction mechanisms, and if the (possibly spoofed)
source IP address is allowed to send mode 7 queries, then an attacker can
send a crafted packet to ntpd that will cause it to crash. [CVE-2015-7848]
The default configuration of ntpd(8) within FreeBSD does not allow mode 7
packets.
If ntpd(8) is configured to use autokey, then an attacker can send packets to
ntpd that will, after several days of ongoing attack, cause it to run out of
memory. [CVE-2015-7701]
The default configuration of ntpd(8) within FreeBSD does not use autokey.
If ntpd(8) is configured to allow for remote configuration, and if the
(possibly spoofed) source IP address is allowed to send remote configuration
requests, and if the attacker knows the remote configuration password, it is
possible for an attacker to use the "pidfile" or "driftfile" directives to
potentially overwrite other files. [CVE-2015-5196]
The default configuration of ntpd(8) within FreeBSD does not allow remote
configuration
An ntpd(8) client that honors Kiss-of-Death responses will honor
Kiss-of-Death messages that have been forged by an attacker, causing it to
delay or stop querying its servers for time updates. Also, an attacker can
forge packets that claim to be from the target and send them to servers
often enough that a server that implements Kiss-of-Death rate limiting will
send the target machine a Kiss-of-Death response to attempt to reduce the
rate of incoming packets, or it may also trigger a firewall block at the
server for packets from the target machine. For either of these attacks to
succeed, the attacker must know what servers the target is communicating
with. An attacker can be anywhere on the Internet and can frequently learn
the identity of the time source of a target by sending the target a time
query. [CVE-2015-7704]
The fix for CVE-2014-9750 was incomplete in that there were certain code
paths where a packet with particular autokey operations that contained
malicious data was not always being completely validated. Receipt of these
packets can cause ntpd to crash. [CVE-2015-7702].
The default configuration of ntpd(8) within FreeBSD does not use autokey.
III. Impact
An attacker which can send NTP packets to ntpd(8) which uses cryptographic
authentication of NTP data, may be able to inject malicious time data
causing the system clock to be set incorrectly. [CVE-2015-7871]
An attacker which can send NTP packets to ntpd(8) can block the communication
of the daemon with time servers, causing the system clock not being
synchronized. [CVE-2015-7704]
An attacker which can send NTP packets to ntpd(8) can remotely crash the
daemon, sending malicious data packet. [CVE-2015-7855] [CVE-2015-7854]
[CVE-2015-7853] [CVE-2015-7852] [CVE-2015-7849] [CVE-2015-7848]
An attacker which can send NTP packets to ntpd(8) can remotely trigger the
daemon to overwrite its configuration files. [CVE-2015-7851] [CVE-2015-5196]
IV. Workaround
No workaround is available, but systems not running ntpd(8) are not
affected. Network administrators are advised to implement BCP-38,
which helps to reduce risk associated with the attacks.
V. Solution
Perform one of the following:
1) Upgrade your vulnerable system to a supported FreeBSD stable or
release / security branch (releng) dated after the correction date.
The ntpd service has to be restarted after the update. A reboot is
recommended but not required.
2) To update your vulnerable system via a binary patch:
Systems running a RELEASE version of FreeBSD on the i386 or amd64
platforms can be updated via the freebsd-update(8) utility:
# freebsd-update fetch
# freebsd-update install
The ntpd service has to be restarted after the update. A reboot is
recommended but not required.
3) To update your vulnerable system via a source code patch:
The following patches have been verified to apply to the applicable
FreeBSD release branches.
a) Download the relevant patch from the location below, and verify the
detached PGP signature using your PGP utility.
[*** v1.1 NOTE ***] If your sources are not yet patched using initial
advisory patches, then you need to apply full patches named ntp-NNN.patch,
where NNN stands for the release version. If your sources are already
updated, or patched with patches from initial advisory, then you need to
apply incremental patches, named ntp-NNN-inc.patch, where NNN stands for
the release version.
[FreeBSD 10.2-RELEASE-p5, not patched with initial SA-15:25 patch]
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-102.patch.xz
# unxz ntp-102.patch.xz
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-102.patch.asc
# gpg --verify ntp-102.patch.asc
[FreeBSD 10.1-RELEASE-p22, not patched with initial SA-15:25 patch]
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-101.patch.xz
# unxz ntp-101.patch.xz
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-101.patch.asc
# gpg --verify ntp-101.patch.asc
[FreeBSD 9.3-RELEASE-p28, not patched with initial SA-15:25 patch]
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-93.patch.xz
# unxz ntp-93.patch.xz
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-93.patch.asc
# gpg --verify ntp-93.patch.asc
[FreeBSD 10.2-RELEASE-p6, initial SA-15:25 patch applied]
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-102-inc.patch
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-102-inc.patch.asc
# gpg --verify ntp-102-inc.patch.asc
[FreeBSD 10.1-RELEASE-p23, initial SA-15:25 patch applied]
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-101-inc.patch
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-101-inc.patch.asc
# gpg --verify ntp-101-inc.patch.asc
[FreeBSD 9.3-RELEASE-p29, initial SA-15:25 patch applied]
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-93-inc.patch
# fetch https://security.FreeBSD.org/patches/SA-15:25/ntp-93-inc.patch.asc
# gpg --verify ntp-93-inc.patch.asc
b) Apply the patch. Execute the following commands as root:
# cd /usr/src
# patch -p0 < /path/to/patch
# find contrib/ntp -type f -empty -delete
c) Recompile the operating system using buildworld and installworld as
described in https://www.FreeBSD.org/handbook/makeworld.html.
d) For 9.3-RELEASE and 10.1-RELEASE an update to /etc/ntp.conf is recommended,
which can be done with help of the mergemaster(8) tool on 9.3-RELEASE and
with help of the etcupdate(8) tool on 10.1-RELEASE.
Restart the ntpd(8) daemon, or reboot the system.
VI. Correction details
The following list contains the correction revision numbers for each
affected branch.
Branch/path Revision
- -------------------------------------------------------------------------
stable/9/ r290269
releng/9.3/ r290363
stable/10/ r289997
releng/10.1/ r290362
releng/10.2/ r290361
- -------------------------------------------------------------------------
To see which files were modified by a particular revision, run the
following command, replacing NNNNNN with the revision number, on a
machine with Subversion installed:
# svn diff -cNNNNNN --summarize svn://svn.freebsd.org/base
Or visit the following URL, replacing NNNNNN with the revision number:
https://svnweb.freebsd.org/base?view=revision&revision=NNNNNN
VII. References
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7701
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7702
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7703
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7704
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7848
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7849
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7850
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7851
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7852
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7853
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7854
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7855
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2015-7871
The latest revision of this advisory is available at
https://security.FreeBSD.org/advisories/FreeBSD-SA-15:25.ntp.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Jtlu
-----END PGP SIGNATURE-----
_______________________________________________
freebsd-announce@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-announce
To unsubscribe, send any mail to "freebsd-announce-unsubscribe@freebsd.org"